RX05KDJ
MOT: Not validGB
·Last updated 2 months ago
Vehicle Overview
Technical Details
Environmental Impact
Status & Compliance
Data provided by DVLA
MOT History
Vehicle testing history with 11 MOT tests
Understanding MOT Defect Categories
Total Tests
11
Passed Tests
7
Failed Tests
4
Latest Test
Passed
Passed - 18 March 2014
MOT Test at Unknown
Mileage: 26,694 mi
Expires: 17 March 2015
Failed - 12 March 2014
MOT Test at Unknown
Mileage: 26,694 mi
Major Defects:
- Major Front Roller brake test indicates a severely grabbing brake (3.3.A1b)
Advisory Notices:
- Advisory Front Brake pad(s) close to minimum limit (3.2.A1f(i))
Passed - 03 January 2013
MOT Test at Unknown
Mileage: 25,565 mi
Expires: 02 January 2014
Passed - 01 March 2012
MOT Test at Unknown
Mileage: 23,733 km
Expires: 31 March 2013
Passed - 01 April 2011
MOT Test at Unknown
Mileage: 20,299 km
Expires: 31 March 2012
Passed - 06 May 2010
MOT Test at Unknown
Mileage: 16,440 mi
Expires: 12 May 2011
Failed - 06 May 2010
MOT Test at Unknown
Mileage: 16,440 mi
Passed - 17 April 2009
MOT Test at Unknown
Mileage: 14,413 mi
Expires: 12 May 2010
Advisory Notices:
- Advisory Front Brake pad(s) close to minimum limit (3.2.A1f(i))
- Advisory Nearside Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)
Failed - 16 April 2009
MOT Test at Unknown
Mileage: 14,413 mi
Major Defects:
- Major Rear Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))
- Major Rear Brake pad(s) (sintered type) less than 1.0mm thick (3.2A1f(ii))
Advisory Notices:
- Advisory Front Brake pad(s) close to minimum limit (3.2.A1f(i))
- Advisory Nearside Steering control chaffing between components and not interfering with free movement of steering (2.1.2a)
- Advisory Front Roller brake test Higher brake efficiency normally obtainable. (3.3.A2a)
Passed - 13 May 2008
MOT Test at Unknown
Mileage: 12,070 km
Expires: 12 May 2009
Failed - 12 May 2008
MOT Test at Unknown
Mileage: 12,070 mi
Major Defects:
- Major Front Tyre tread depth is below minimum requirements of 1.0mm (4.1.3(ii))